Technical data - ENV Refrigerants

ENV Refrigerants are manufactured with 100% Natural Organic Materials and are non-ozone depleting products which are Non-Global warming and completely safe for the environment.

ENV 12 Refrigerants can be used instead of R134a in all R134a A/C systems, including R134a installed in R12 Retrofitted systems, with energy savings of up to 40% over HFC-134a.

ENV 12 Refrigerants are installed as a liquid because they are 2/3 lighter than HFC and CFC products.  Read install instructions on cans and cylinders for liquid installation procedures.

ENV 12 Refrigerants ARE NOT provided to be used instead of R12 and therefore are not subject to be ARI certified and/or have an ASHREA designation like R404 or R12.

ENV Refrigerants carry a guarantee that ENV Refrigerants will not harm air conditioning compressors or other related mechanical equipment when used in accordance with ENV directions.

ENV 12 Refrigerants are compatible with Mineral, Ester and Pag refrigerant oils, and will not harm the O rings or hoses of any A/C system.

Typical gauge reading at 80° F will be between 32 psi - 42 psi on the low pressure side.  Never exceed 50 psi on the low pressure side.  DO NOT overcharge the system. 

Typical gauge readings on the high pressure side will be between 150 psi - 240 psi.  Vent air temperature AT AN IDLE SPEED should never range below 41°.    At the above psi and temperature ranges, lower head pressure may not only increase the life of the compressor, but may also have an affect on mileage (MPG).

Compare and Review - ENV 12 Refrigerants with other products with  which are usually 80 % R22 and 20 % R142 and you will see the specific warnings about how they will affect the hoses and O rings of any A/C system and therefore must be replaced before installing their product.

$ DOLLAR $ for $ DOLLAR $