LASER 1

Diamond Blades For Walk Saws
Brown _USALS10CC1 - blades are specifically engineered and tensioned to operate at SPECIFIC speeds for cutting: Cured Concrete - hard materials with fast cuts at low cost.
Always know what RPM saws operate at and ONLY sell the properly rated blade for the saw AND the correct bond for material to be cut! LASER WELDED - Use WET OR DRY - 10mm - SEGMENT
	14LS10AS3W125	LS-1B - Concrete - 4000 RPM 14” x 10mm x 0.125 x 1" w/pinhole	10 - 25 = 159.95 ea. 26 - 49 = 149.95 ea. 50 + = 139.95 ea.
	14LS10AS3W187	LS-1B - Concrete - 4000 RPM 14” x 10mm x 0.187 x 1" w/pinhole	10 - 25 = 177.95 ea. 26 - 49 = 167.95 ea. 50 + = 157.95 ea.
	14LS10AS3W250	LS-1B - Concrete - 4000 RPM 14” x 10mm x 0.250 x 1" w/pinhole	10 - 25 = 224.95 ea. 26 - 49 = 214.95 ea. 50 + = 204.95 ea.

Brown _USA LS10CC1 - 20" & 24" blades are specifically engineered and tensioned to operate at SPECIFIC speeds for cutting: Cured Concrete - hard materials with fast cuts at low cost.
Always know what RPM saws operate at and ONLY sell the properly rated blade for the saw AND the correct bond for material to be cut! LASER WELDED - Use WET OR DRY - 10mm - SEGMENT
	20LS10CC1W135	LS-1B - Concrete - 3000 RPM 20” x 10mm x 0.135 x 1" w/pinhole	10 - 25 = 256.95 ea. 26 - 49 = 246.95 ea. 50 + = 236.95 ea.
	24lS10CC1W187	LS-1B - Concrete - 2000 RPM 24” x 10mm x 0.187 x 1" w/pinhole	10 - 25 = 314.95 ea. 26 - 49 = 304.95 ea. 50 + = 294.95 ea.
MORE CUTS $ DOLLAR $ for $ DOLLAR $
DIAMOND BLADES FOR WALK SAWS
WALK SAW BLADES - 15 HP OR LOWER
Laser Welded - #1 Soft Bond - Cured Concrete
Laser Welded - #2 Medium Bond - Cured Concrete - Asphalt over Concrete
Laser Welded - #3 Hard Bond - Asphalt/ Green Concrete
SS - Brazed Welded - #1 Soft Bond -Cured Concrete
SS - Brazed Welded - #3 Hard Bond - Asphalt/Green Concrete
Operating instructions for WALK SAWS
MORE - DIAMOND BLADES