LASER 3

Laser Welded - Use Wet Only - 10mm - Segment
Brown _USALS10AS3 - blades are specifically engineered and tensioned to operate at SPECIFIC speeds for cutting: Asphalt/Green Concrete with fast cuts at low cost. Asphalt and Green Concrete are coarse & abrasive, and cutting them with blades that are designed for Cured Concrete extremely reduces blade life. AS3 blades have an Abrasive Resistant Bond, which provides longer blade life.
Always know what RPM saws operate at and ONLY sell the properly rated blade for the saw AND the correct bond for material to be cut! DROP SEGMENTS provided for Under Cut Protection
	12LS10AS3W125	LS-3B - Asphalt - 5000 RPM 12” x 10mm x 0.125 x 1" w/pinhole	10 - 25 = 133.95 ea. 26 - 49 = 123.95 ea. 50 + = 113.95 ea.
	14LS10AS3W125	LS-3B - Asphalt - 4000 RPM 14” x 10mm x 0.125 x 1" w/pinhole	10 - 25 = 166.95 ea. 26 - 49 = 156.95 ea. 50 + = 146.95 ea.
	14LS10AS3W187	LS-3B - Asphalt - 4000 RPM 14” x 10mm x 0.187 x 1" w/pinhole	10 - 25 = 186.95 ea. 26 - 49 = 176.95 ea. 50 + = 166.95 ea.
	14LS10AS3W250	LS-3B - Asphalt - 4000 RPM 14” x 10mm x 0.250 x 1" w/pinhole	10 - 25 = 234.95 ea. 26 - 49 = 224.95 ea. 50 + = 214.95 ea.
MORE CUTS $ DOLLAR $ for $ DOLLAR $
DIAMOND BLADES FOR WALK SAWS
WALK SAW BLADES - 15 HP OR LOWER
Laser Welded - #1 Soft Bond - Cured Concrete
Laser Welded - #2 Medium Bond - Cured Concrete - Asphalt over Concrete
Laser Welded - #3 Hard Bond - Asphalt/ Green Concrete
SS - Brazed Welded - #1 Soft Bond -Cured Concrete
SS - Brazed Welded - #3 Hard Bond - Asphalt/Green Concrete
Operating instructions for WALK SAWS
MORE - DIAMOND BLADES