Diamond Blades

General Information about WHAT BLADES to use for specific Materials.

We are pleased to CONFIRM that All - Brown _USA DIAMOND Blades are manufactured under ISO 9001, ISO 9002 and DSA 5371 quality approved standards, (AND/OR ANY SUPERIOR SPECIFICATION THAT THE FACTORY MIGHT MEET).

Brown _USA DIAMOND Blades are engineered and manufactured using Premium quality diamonds, grit sizes and diamond concentrations that provide Premium quality blades for fast cuts and long life.

Always know what RPM saws operate at and ONLY sell the properly rated blade for the saw AND the correct bond for materials to be cut!

# 1 Bond is a soft bond for fast cutting of hard materials

If the blade bounces, and does not cut, the bond is too hard and the blade segments will glaze.

Concrete never stops curing, and the older it is, the harder it gets!

# 2 Bond is a medium bond for slower cutting of hard materials with long blade life (more inch feet)

# 3 Bond is a hard bond for fast cutting of soft abrasive materials with long blade life (more inch feet)

More cuts (more inch feet) $ Dollar for Dollar $

APPLICATIONS FOR Brown _USA BLADES

*Brown _USA - HS10SGGP - 10mm blades are wet/dry segmented blades which help keep up front cost down with Long Life and are excellent for General Purpose Masonry materials & cured concrete.

*Brown _USA - HS10TUGP - 10mm blades are wet/dry General Purpose Masonry Turbo blades designed for fast cutting of brick, block, & cured concrete.

*Brown _USA - LS10HSPAS - 10mm high speed blades are wet/dry Laser welded - segmented blades for fast cutting of light - weight block, asphalt and green concrete.

*Brown _USA - LS10HSPCC - 10mm high speed blades are wet/dry Laser welded - segmented blades for fast cutting of brick, block and cured concrete.

*Brown _USA - LS10TSGP - 10mm high speed blades are wet/dry Laser welded - Segmented-Turbo blades for fast cutting of paver brick, concrete pipe with wire mesh, hard stone & concrete pavers.

*Brown _USA - HS85WCGR - 10mm blades are wet/dry General Purpose Masonry Wavy Core Turbo blades designed for fast cutting of ceramic & glazed tiles, slate, granite, marble, roofing tiles and terrazzo.

*Brown _USA - HS10TL - 10mm- 4" & 4-1/2" blades are wet/dry blades & larger blades are wet only. These quality continuous rim tile blades are designed for fast cutting of ceramic floor tile, slate, granite, marble, and porcelain at a reasonable price.

*Brown _USA - HS10STW & HS10TWH - 10mm soft & hard bond Tuck blades are wet/dry blades, which are ideal for restoration projects to quickly and easily clean and rout mortar joints.

*Brown _USA - LS10CC1 & LS10CC2 - Premium 10mm Laser welded - segmented soft & medium soft bond are wet/dry blades for cutting cured concrete using 20 - 65hp walk saws.

*Brown _USA - LS10AS3W - Premium 10mm Laser welded - segmented Hard bond are wet/dry blades for cutting asphalt and green concrete using 20 - 65hp walk saws.

*Brown _USA - SS10CC1- Premium 10mm Brazed welded - segmented soft bond wet only blades for cutting cured concrete using 20 - 35hp walk saws.

*Brown _USA - SS10AS3- Premium 10mm Brazed welded - segmented hard bond wet only blades for cutting asphalt/green concrete using 20 - 35hp walk saws.

ALWAYS

*Follow blade manufacturer's recommendation for material being cut.

*Follow saw operations manual for safe operation.

*Check arbor shaft & flanges for damage/uneven wear.

*Make sure that blades are mounted on correct diameter shaft with arrow pointed in proper direction, and that blade shaft nut is securely tightened.

*Allow blade to cut at its own speed.

*Run all blades wet when possible, and you must run blades wet, when wet is specified.

*Inspect blade periodically during use for fatigue cracks & segment damage.

*Wear proper safety protection & observe safe operating procedures to prevent bodily harm.

*For Dry and Wet Cutting blades - always follow all manufacturer's safety recommendations and comply with ANSI B7.1, B7.5, OSHA and Safety Guidelines furnished with each product.

NEVER

*Force blade into material - Allow blade to cut at its' own speed.

*Exceed maximum speed established for each blade.

*Operate any saw unless safety guards are in place.

*Place any portion of your body in line with blade while it's rotating.

*Overheat by making long continuous cuts with dry cutting blade - Allow blade to cool by turning in air every few minutes.

*Cut metal, plastic, wood or non-masonry materials.

WARNING: 1.) Sawing generates dust. Excessive airborne particles may cause irritation to eyes, skin & respiratory tract. To avoid breathing impairment always employ dust controls and protection suitable to the material being cut or drilled, in accordance with OSHA regulations. 2.) This product may contain chemicals known to cause cancer, birth defects and/or that may be harmful to your health.