12" and 14" T-SEG blades

Brown _USA 12" and 14" T-SEG blades are specifically engineered and tensioned to operate at HIGH SPEEDS up to 5400 RPM cutting:

Cured Concrete, Brick - Block & Granite - hard materials

Hand Held High Speed Saws, Brick or Chop Saws and Low 15 HP or less Walk Saws. 

Use wet or dry - 10mm - SEGMENT HEIGHT - Laser Welded - turbo-segmented blade cuts faster and last longer than any other conventional segmented diamond blade on the market today.

 12LS10TSGPW125

 Seg/Turbo /GP Masonry-1

 12"x0.125x10mmx1"-20mm   w/PIN-HOLE

10 - 25 = 125.95 ea.
26 - 49 = 115.95 ea.
   50 +  = 105.95 ea.

 14LS10TSGPW125

 Seg/Turbo /GP Masonry-1

 14"x0.125x10mmx1"-20mm   w/PIN-HOLE

10 - 25 = 139.95 ea.
26 - 49 = 129.95 ea.
   50 +  = 119.95 ea.

MORE CUTS $ DOLLAR $ for $ DOLLAR $

Brown _USA 16", 18” and 20" T-SEG blades are specifically engineered and tensioned to operate at LOWER SPEEDS up to 3500 RPM for 16”, and 3000 RPM for 18” & 20” blades cutting:

Cured Concrete, Brick - Block & Granite - hard materials

Brick or Chop Saws and 20 HP or higher Walk Saws.

Use wet or dry - 10mm - SEGMENT HEIGHT - Laser Welded - turbo-segmented blade cuts faster and last longer than any other conventional segmented diamond blade on the market today.

 16LS10TSGPW125

 Seg/Turbo /GP Masonry-1

 16"x0.125x10mmx1"-20mm   w/PIN-HOLE

10 - 25 = 211.95 ea.
26 - 49 = 201.95 ea.
   50 +  = 191.95 ea.

 18LS10TSGPW135

 Seg/Turbo /GP Masonry-1

 18"x0.135x10mmx1"-20mm   w/PIN-HOLE

10 - 25 = 229.95 ea.
26 - 49 = 219.95 ea.
   50 +  = 209.95 ea.

 20LS10TSGPW135

 Seg/Turbo /GP Masonry-1

 20"x0.135x10mmx1"-20mm   w/PIN-HOLE

10 - 25 = 272.95 ea.
26 - 49 = 262.95 ea.
   50 +  = 252.95 ea.